Home
Search results “Libcrypto ubuntu apt-get upgrade”
How to install and update OpenSSL on Ubuntu 16.04
 
03:29
This video explains the method to install and update OpenSSL on Ubuntu. OpenSSL is a library that provides cryptographic functionality. For more explanation on this video: https://www.linuxhelp.com/how-to-install-and-update-openssl-on-ubuntu-16-04/
Views: 16128 Linux Help
Installing Oxcoin Core on Ubuntu
 
09:53
How to Install Oxcoin Core on Linux. Requirements : 1. Ubuntu VPS ( At least 2GB of RAM ) 2. SSL Client ( Putty ) If you're using Windows. Installation Commands : sudo apt-get update sudo apt-get upgrade sudo apt-get install build-essential libssl-dev libdb-dev libdb++-dev libboost-all-dev git libssl1.0.0-dbg sudo apt-get install libdb-dev libdb++-dev libboost-all-dev libminiupnpc-dev libminiupnpc-dev libevent-dev libcrypto++-dev libgmp3-dev sudo wget https://www.oxgram.com/dl/node-installer.sh ------------------------------------ In case of Errors: Download node-installer.sh on your PC, And copy-paste all codes into the SSL. ------------------------------------ في حالة الاخطاء، رجاء تحميل node-installer.sh على جهازك ونسخ ولصق كل الاكواد التي بداخله الى شاشة الاوامر
Views: 337 Oxgram
How To install Upgrade Openssl On Ubuntu 18.04 LTS
 
01:38
OpenSSL is a widely used crypto library that implements SSL and TLS protocols to secure communications over computer networks.
how to install blueborne exploit
 
07:40
https://github.com/ojasookert/CVE-2017-0785.git apt-get update apt-get install python2.7 python-pip python-dev git libssl-dev libffi-dev build-essential pip install --upgrade pip pip install --upgrade pwntools sudo apt-get install bluetooth libbluetooth-dev sudo pip install pybluez note this is for educational purpose only #too dangerous
Views: 27733 Fs0c1ety_BS
How to Install Davinci Resolve 14 / 15 on Linux Tutorial
 
06:25
Complete Guide to Resolve 50% Off ►► http://bit.ly/DavinciResolve-HalfOff ◢◤◣◥◢◤◣◥◢◤◣◥◢◤◣◥ Guide for Linux - Instructions below (Executed on Linux Mint) Make sure base system is updated first (sudo apt-install update) Download Davinci Resolve - https://www.blackmagicdesign.com/products/davinciresolve cd ~/Downloads Extract zip (.sh file is what we care about) sudo ./DaV* sudo apt-get install libssl1.0.0 libssl-dev sudo ln -s /lib/x86_64-linux-gnu/libssl.so.1.0.0 /usr/lib/libssl.so.10 sudo ln -s /lib/x86_64-linux-gnu/libcrypto.so.1.0.0 /usr/lib/libcrypto.so.10 You might also need ------------------------- sudo apt install ocl-icd-opencl-dev switch to nvidia driver (driver manager) To run ----- cd /opt/resolve/bin ./resolve To make shortcut work ----- cd /opt/ sudo chown -R chris:chris resolve See My Full Software Courses https://www.udemy.com/user/chris-navarre/ http://christutorials.teachable.com ►►Help Make Future Videos Possible ➣ Shopping Amazon with My Link Helps with No Additional Cost to You http://amzn.to/2s93HqF ➣ Or You Can Support the Channel Directly Patreon: https://www.patreon.com/christutorials Paypal: paypal.me/christutorials Bitcoin: 17Pn5PifFmRkHRAqCZQAom1ZjCiSf7qJjJ Ethereum: 0x6f2781F382952c8caCDbE99C46F07c265ab59627 ➣ Also Follow Me On Minds ►►http://bit.ly/ChrisTutorialsOnMinds Gab.ai ►► https://gab.ai/ChrisTutorials Written Article Tutorials at ►► http://christutorials.com/
Views: 14840 Chris' Tutorials
01 Plone 5 Installation on Ubuntu Server 14.04 OS
 
27:46
Plone 5 Installation on Ubuntu Server 14.04 OS 1. Update and Upgrade ubuntu OS Step 1. Prepare a a system or VPS with Ubuntu os. Step 2. Update and Upgrade OS sudo apt-get update sudo apt-get upgrade Step 3. Install the operating system software and libraries needed to run Plone sudo apt-get install python-setuptools python-dev build-essential libssl-dev libxml2-dev libxslt1-dev libbz2-dev libjpeg62-dev sudo apt-get install libreadline-dev wv poppler-utils sudo apt-get install git Step 4. Download the latest Plone unified installer wget --no-check-certificate https://launchpad.net/plone/5.0/5.0.4/+download/Plone-5.0.4-UnifiedInstaller.tgz Step 5. Extract the downloaded file tar -xf Plone-5.0.4-UnifiedInstaller.tgz cd Plone-5.0.4-UnifiedInstaller ./install.sh Step 6. Start/stop/restart Plone Start sudo /home/administrator/Plone/zeocluster/bin/plonectl start Stop sudo /home/administrator/Plone/zeocluster/bin/plonectl stop Restart sudo /home/administrator/Plone/zeocluster/bin/plonectl restart
Views: 1005 Amarnath Jaiswal
Odoo 12.0 CE Installation on Ubuntu Server 18.04 LTS with Nginx
 
59:32
Support me on #Patreon: https://www.patreon.com/Mo7amed_Ma9dy Odoo 12.0 CE Installation on Ubuntu Server 18.04 LTS with Nginx Create a server on Digital Ocean https://m.do.co/c/6a942903dcec - Install dependencies sudo apt-get install git python3-pip python3-dev libjpeg-dev libxml2-dev libssl-dev libsasl2-dev node-less libldap2-dev libxslt-dev postgresql nginx wget https://builds.wkhtmltopdf.org/0.12.1.3/wkhtmltox_0.12.1.3-1~bionic_amd64.deb sudo apt install ./wkhtmltox_0.12.1.3-1~bionic_amd64.deb - Add odoo as a system user: sudo adduser --system --group odoo --home /opt/odoo - Add odoo as a DB user sudo su - postgres createuser -s odoo alter role odoo with password 'secret'; - Clone Odoo 12.0 CE sudo su - odoo -s /bin/bash git clone https://www.github.com/odoo/odoo --depth=1 --branch=12.0 --single-branch - Odoo Conf File [options] ; This is the password that allows database operations: admin_passwd = secret db_host = False db_port = False db_user = odoo12 db_password = False addons_path = /opt/odoo12/odoo/addons proxy_mode = True xmlrpc_interface = 127.0.0.1 netrpc_interface = 127.0.0.1 - Nginx Config File server { server_name 206.189.25.239 206.189.25.239; // replace with your IP or Domain listen 80; access_log /var/log/nginx/testing-access.log; error_log /var/log/nginx/testing-error.log; location /longpolling { proxy_connect_timeout 3600; proxy_read_timeout 3600; proxy_send_timeout 3600; send_timeout 3600; proxy_pass http://127.0.0.1:8072; } location / { proxy_connect_timeout 3600; proxy_read_timeout 3600; proxy_send_timeout 3600; send_timeout 3600; proxy_pass http://127.0.0.1:8069/; proxy_set_header Host $http_host; proxy_set_header X-Forwarded-Host $http_host; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; } gzip on; gzip_min_length 1000; } upstream odoo { server 127.0.0.1:8069 weight=1 fail_timeout=0; } upstream odoo-im { server 127.0.0.1:8072 weight=1 fail_timeout=0; }
Views: 2169 Mohamed Magdy
how to install openssl on ubuntu, linux mint, kali linux
 
01:01
how to install openssl on ubuntu, linux mint, kali linux open terminal (CNTR+ALT+T) 1. sudo apt update 2. sudo apt-get install openssl
Views: 4486 How To Install
Installing and Configuring MITMF
 
14:12
Installing and Configuring MITMF The Real steps and verification step by step. Commands: apt-get install python-dev python-setuptools libpcap0.8-dev libnetfilter-queue-dev libssl-dev libjpeg-dev libxml2-dev libxslt1-dev libcapstone3 libcapstone-dev libffi-dev file pip install virtualenvwrapper pip install --upgrade pip git clone https://github.com/byt3bl33d3r/MITMf cd MITMf && git submodule init && git submodule update --recursive pip install -r requirements.txt python mitmf.py ..............
Views: 20072 Arthur Salmon
Install BRO 2.5 on Ubuntu 14.04
 
26:53
Install Bro-IDS 2.5 on Ubuntu 14.04 $ apt-get update Installing Dependencies $ apt-get install cmake make gcc g++ flex bison libpcap-dev libgeoip-dev libssl-dev python-dev zlib1g-dev libmagic-dev swig2.0 Download and extract the Bro-IDS tarball $ wget https://www.bro.org/downloads/bro-2.5.1.tar.gz $ tar -xzvf bro-2.5.1.tar.gz Configuring, building, and installing the Bro-IDS application $ cd bro-2.5.1 $ ./configure $ make $ sudo make install Change PATH $ vim ~/.bashrc $ export PATH=/usr/local/bro/bin: $PATH
Views: 1904 Vinh Hoang
INSTALL DOGECOIN LINUX! [HD]
 
06:44
Welcome to How-to install doge coin wallet in linux Ubuntu/Debian! Such coins! Thanks for the watch! leave like and sub! ;) ===================== Commands: doge coin: git clone https://github.com/dogecoin/dogecoin.git sudo apt-get install build-essential pkg-config sudo apt-get install libtool autotools-dev autoconf automake sudo apt-get install libssl-dev sudo apt-get install libqt4-dev libprotobuf-dev protobuf-compiler sudo apt-get install libdb5.1-dev sudo apt-get install libdb5.1++-dev sudo apt-get install libboost-all-dev sudo apt-get install libqt5gui5 libqt5core5 libqt5dbus5 qttools5-dev qttools5-dev-tools libprotobuf-dev ./autogen ./configure make make install +Website: http://dogecoin.com/ ================== Thanks for watching!
Views: 5406 MewDoesHacking
How to Install the Latest Python Version on Linux Mint, Debian and Ubuntu
 
07:33
DESCRIPTION: In this tutorial I show how to build Python from source code. This method can be used to install the latest version of Python and get all the new features. ----------------------------- python --version python3 --version Before installing Python make sure you have updated your system to the latest version. Install newest updates via "Update manager" if your system has it. If not, run those commands: sudo apt-get update sudo apt-get dist-upgrade It's necessary to reboot the computer after you update the system. In the following commands don't forget to change 3.7.0 to the version that you downloaded from python.org! sudo apt-get install dirmngr gpg --recv-key AA65421D cd ~/Desktop gpg --verify Python-3.7.0.tar.xz.asc sudo cp ~/Desktop/Python-3.7.0.tar.xz /usr/src/ cd /usr/src sudo tar -xf Python-3.7.0.tar.xz sudo apt-get install build-essential checkinstall zlib1g zlib1g-dev openssl sudo apt-get install libreadline-gplv2-dev libncursesw5-dev libssl-dev libsqlite3-dev tk-dev libgdbm-dev libc6-dev libbz2-dev sudo apt-get install blt-dev docutils-common libbluetooth-dev libdb-dev libdb5.3-dev libffi-dev libmpdec-dev libxss-dev net-tools python-babel-localedata python3-alabaster python3-babel python3-docutils python3-imagesize python3-jinja2 python3-markupsafe python3-pygments python3-roman python3-sphinx python3-tz sphinx-common tcl-dev tcl8.6-dev time tk8.6-blt2.5 tk8.6-dev x11proto-scrnsaver-dev xvfb cd Python-3.7.0 sudo ./configure sudo make altinstall or (not recommended!): sudo make install sudo python3.7 -m pip install requests Please support my work on https://www.patreon.com/neoncipher ---------------------------- PYPL PopularitY of Programming Language chart was created by Pierre Carbonnelle http://pypl.github.io/PYPL.html?country=US and licensed under a Creative Commons Attribution 3.0 Unported License. https://creativecommons.org/licenses/by/3.0/
Views: 26111 Neon Cipher
OpenSSL Certification Authority (CA) on Ubuntu Server
 
16:07
https://nwl.cl/2y56Mho - OpenSSL is a free, open-source library that you can use to create digital certificates. We can use this to build our own CA (Certificate Authority).
Views: 22818 Networklessons.com
SOLVED libssl.so.1.0.0 error in Kali Linux While installing Utorrent in Kali Linux[SOLVED]
 
18:02
SOLVED libssl.so.1.0.0 error in Kali Linux While installing Utorrent This is the ONLY & first video depicting this solved procedure. I searched many sites but found only 1 site showing full great install procedure but having a basic defect in article which i have corrected in the starting. Please Only Watch this video for Solving this BIG isuue related to libssl.so.1.0.0 library. I was helpless and decided to make my own video to show you all how to install utorrent solving this error. Hope you guys enjoyed the video. Please Subscribe to my Channel to Get updated to new videos uploaded by me. Thanks :)
Views: 1975 Tech Infinity
WINDOWS Tutorial - HempCoin KMD Wallet In Linux VIRTUAL BOX (UPDATED)
 
18:23
VIRTUAL BOX: https://www.virtualbox.org/ UBUNTU: https://www.ubuntu.com/desktop BLACKMARKET HEMPCOIN DONATIONS: RD1pELowGGP5gwKrd4QygW3TMZpsSdxsM7 GETTING YOUR PRIVATE KEY: 1: FILE - UNLOCK WALLET 2: ENTER PASSWORD 3: TOOLS - DEBUG CONSOLE 4: TYPE COMMAND: dumpprivkey yourwalletaddresshere 5. your Private key will be revealed, please back this up. DO NOT SHARE WITH ANYONE VIRTUALBOX/LINUX PORTION: 6: sudo apt-get update 7: sudo apt-get upgrade -y 8: sudo apt-get install build-essential pkg-config libc6-dev m4 g++-multilib autoconf libtool libncurses-dev unzip git python zlib1g-dev wget bsdmainutils automake libboost-all-dev libssl-dev libprotobuf-dev protobuf-compiler libqrencode-dev libdb++-dev ntp ntpdate nano software-properties-common curl libevent-dev libcurl4-gnutls-dev cmake clang libsodium-dev -y 9: cd ~ 10: git clone https://github.com/jl777/komodo 11: cd komodo 12: git checkout beta 13: ./zcutil/fetch-params.sh 14: ./zcutil/build.sh -j$(nproc) 15: cd ~ 16: mkdir .komodo 17: cd .komodo 18: nano komodo.conf 19: Add the following lines to the komodo.conf file (replace rpcuser and rpcpassword with your own, TO SAVE CONFIG FILE PRESS CTRL+X then press Y For YES) rpcuser=usernameChangeItToSomethingSecure rpcpassword=passwordChangeItToSomethingSecure txindex=1 bind=127.0.0.1 rpcbind=127.0.0.1 addnode=78.47.196.146 addnode=5.9.102.210 addnode=178.63.69.164 addnode=88.198.65.74 addnode=5.9.122.241 addnode=144.76.94.38 20: cd ~ 21: cd komodo/src 22: Now you can start THC daemon to sync with the network ./komodod -ac_name=THC -ac_supply=251253103 -ac_reward=360000000,300000000,240000000,180000000,150000000,90000000,0 -ac_staked=100 -ac_eras=7 -ac_end=500001,1000001,1500001,2000001,2500001,4500001,0 -ac_perc=233333333 -ac_cc=2 -ac_ccenable=229,236,240 -ac_script=2ea22c8020987fad30df055db6fd922c3a57e55d76601229ed3da3b31340112e773df3d0d28103120c008203000401ccb8 -ac_founders=150 -ac_cbmaturity=1 -ac_sapling=1 -addnode=195.201.20.230 -addnode=195.201.137.5 -earlytxid=7e4a76259e99c9379551389e9f757fc5f46c33ae922a8644dc2b187af2a6adc1 VARIOUS COMMANDS: SHOW WALLET BALANCE & CURRENT BLOCK: ./komodo-cli -ac_name=THC getinfo CREATE RECEIVING ADDRESS: ./komodo-cli -ac_name=THC getnewaddress VALIDATE ADDRESS: ./komodo-cli -ac_name=THC validateaddress Rxxxx this will return a value in { } you need to copy the pubkey SET PUBLIC KEY: ./komodo-cli -ac_name=THC setpubkey Pubkey SEND FUNDS TO ADDRESS: ./komodo-cli -ac_name=THC sendtoaddress "Raddress" "Amount" EXAMPLE OF SEND: ./komodo-cli -ac_name=THC sendtoaddress RD1pELowGGP5gwKrd4QygW3TMZpsSdxsM7 1000 To LOCK 100k THC: ./komodo-cli -ac_name=THC rewardslock THC 5b24f3dfc85fe880450696ff23f1268ab9b6e97cd21b09857f78b37e33c5b543 amount START WALLET: ./komodod -ac_name=THC -ac_supply=251253103 -ac_reward=360000000,300000000,240000000,180000000,150000000,90000000,0 -ac_staked=100 -ac_eras=7 -ac_end=500001,1000001,1500001,2000001,2500001,4500001,0 -ac_perc=233333333 -ac_cc=2 -ac_ccenable=229,236,240 -ac_script=2ea22c8020987fad30df055db6fd922c3a57e55d76601229ed3da3b31340112e773df3d0d28103120c008203000401ccb8 -ac_founders=150 -ac_cbmaturity=1 -ac_sapling=1 -addnode=195.201.20.230 -addnode=195.201.137.5 -earlytxid=7e4a76259e99c9379551389e9f757fc5f46c33ae922a8644dc2b187af2a6adc1 STOP WALLET: ./komodo-cli -ac_name=THC stop
Views: 162 BlackMarket Crypto
How To Install And Update OpenSSL On Linuxmint 18.3
 
03:50
This video covers the method to install and update OpenSSL on Linux Mint 18.3. OpenSSL is an open-source implementation of the SSL and TLS protocols. For more explanation on this video: https://www.linuxhelp.com/how-to-install-and-update-openssl-on-linuxmint-18-3/
Views: 697 Linux Help
kernel compile in ubuntu
 
08:39
1 Install compulsory packages sudo apt-get install fakeroot kernel-wedge build-essential 2 Install Dependency sudo apt-get install git-core libncurses5 libncurses5-dev libelf-dev asciidoc binutils-dev crash kexec-tools makedumpfile kernel-wedge libssl-dev bc debhelper kernel-package libc6-dev 3 Download Kernel for kernel.org cd /usr/src wget ftp://ftp.kernel.org/pub/linux/kernel/v4.x/linux-4.8.4.tar.gz tar xvf linux-4.8.4.tar.gz 4 Create .config file and make oldconfig cd /usr/src/linux-4.8.4/ cp /boot/config-$(uname -r) .config make oldconfig 5 compile, make and create .deb file fakeroot make-kpkg --initrd --append-to-version=-digivalet kernel-image kernel-headers ## Note: Wait approx 4 to 10 hour
Views: 1685 Linux Topic
Installing Crypto++ library on Ubuntu with AES example
 
05:26
hi guys, i'm going to show u how to install ""Crypto++"" library on ubuntu and run simple AES encryption/decryption example 1- open u r terminal 2- run the following commands: sudo apt-get update sudo apt-get install libcrypto++-dev libcrypto++-doc libcrypto++-utils 3- congrat, y have intsalled crypto++ on u r ubuntu 4- now, for the AES example 5- copy the program (https://www.mediafire.com/?12367xud3yvk1by) and saved it as "aesexample2.cpp" (i saved it in my desktop) 6- now, open u r terminal and go to the directory where u have stored the program 7- now type the following command: g++ -g3 -ggdb -O0 -Wall -Wextra -Wno-unused -o AesOutput aesexample2.cpp -lcryptopp 8- now write the following: ./AesOutput
Views: 9351 Abudalkhalek Hussien
Installing Python-3.5.2 in Ubuntu
 
06:13
You can update by using following commands: sudo apt-get install python3 (or) sudo apt-get upgrade Download python-3.x version from the python.org Extract .tar.gz using the command tar xvf Python-3.x.tar.gz goto that directory using cd dir_name $./configure $sudo make $sudo make install in that you will get an error for pip it requires ssl install the service using this command $sudo apt-get install libssl-dev openssl after that again install using $sudo make install After that use python3 command to open interpreter
Views: 27457 Techmonster
Fix "E : Unable to Locate Package" Error In Kali Linux
 
03:18
In this video I will show you how we can fix. Unable to find package error in Kali Linux. First after installing a clean Kali Linux the sources.list contains only tow repository, and if you try to do update it maybe update a few apps and if you try to install a new app 90% it won't and it will give you a message saying: E: Unable to locate package, or, E: Package 'gimp' has no installation candidate. For example if you want to install a software using apt-get command, for demonstration purposes. I will install gimp which is a open-source software for raster graphics editor used for image retouching and editing, and I'm using a p t get command for installing gimp. Now you can see that I got an error saying, E: Package 'gimp' has no installation candidate. so let's fix this error by editing the sources.list file . The simplest way is to edit the sources.list file located in e t c / a p t / to do so open the Terminal and type ( leafpad / e t c / a p t / sources.list ) after this commend, you will get something like this... now remove every line of them and open your web browser and go to the link given on screen or in the description below. or you can simple google Kali Linux repository. here we got the repository of Kali Linux rolling and if you are using any older version. Then scroll down and you will get repository for that version also, copy the repository and paste it in the source file, and then save it. go back to the terminal and type a p t - get update. It can take some time depending upon your Internet speed. after it finsh updating we can install GIMP using A P T get command. As you can see it’s working fine now and you can install Gimp and update your system without any error. Help and subscribe for more tips and tricks
Views: 32929 KaliTut
Installing and Running Solo on Ubuntu Server 16.04
 
03:16
Installing Solo on Ubuntu Server 16.04 Update $ sudo apt-get update $ sudo apt-get upgrade $ sudo apt-get install nano $ sudo apt-get install p7zip-full Install pre-requisites $ sudo apt update && sudo apt install build-essential cmake pkg-config libboost-all-dev libssl-dev libzmq3-dev libunbound-dev libsodium-dev libunwind8-dev liblzma-dev libreadline6-dev libldns-dev libexpat1-dev doxygen graphviz libpgm-dev $ sudo apt-get install libgtest-dev && cd /usr/src/gtest && sudo cmake . && sudo make && sudo mv libg* /usr/lib/ cd Get Latest Binaries $ wget https://www.minesolo.com/release/solo-latest-linux64.tar.gz **Note that the version you extract will likely be different from the video** Extract binaries $ mkdir ./solo $ tar xfv Solo-latest-linux64.tar.gz --directory ./solo --strip-components=1 Add Solo to your Path to make life easy $ nano .profile PATH="$PATH:$HOME/solo" # this line goes at the end of your .profile, ctrl + o then enter to save, ctrl + x to exit Reload profile so new path is recognized $ source ~/.profile Download and extract latest snapshot $ mkdir ~/.solo && cd ~/.solo && wget https://minesolo.com/release/snapshot.7z && 7z x -Aoa snapshot.7z Start Solo $ solod Wait for solod to fully sync with the network, type exit to return to the command prompt. If you already have your solo address for mining you can now start solo in the background with the following command: $ solod --detach --start-mining YOUR_SOLO_ADDRESS_HERE --mining-threads NUMBER_OF_THREADS YOUR_SOLO_ADDRESS_HERE = your mining address NUMBER_OF_THREADS = the number of mining threads you want to run, this is usually about the same as number of cores available but may be higher or lower depending on CPU and other processes running.
Views: 5 RT Money
Install Sparklyr on Ubuntu
 
05:18
Install Sparklyr on Ubuntu - steps to install and run Sparklyr -------------------------- Sparklyr is an R interface to Apache Spark, a fast and general engine for big data processing, For the install assuming R is already Installed on the server (refer to my other videos on how to install R on Ubuntu) # Install Java - required when working with Spark sudo apt-get install --assume-yes python-software-properties debconf-utils sudo add-apt-repository -y ppa:webupd8team/java sudo apt-get update echo "oracle-java8-installer shared/accepted-oracle-license-v1-1 select true" | sudo debconf-set-selections sudo apt-get install --assume-yes oracle-java8-installer # Install Sparklyr sudo apt-get --assume-yes install libxml2-dev sudo apt-get --assume-yes install libcurl4-openssl-dev libssl-dev sudo R -e 'install.packages(c("sparklyr"), repos="http://cran.rstudio.com/")'
Views: 1084 Melvin L
Перемены в Linux для домашних ПК: Proton, Flatpak и щепотка Davinci Studio
 
16:36
http://mgts.ru/home/internet/tariffs/?utm_source=youtube&utm_medium=video&utm_campaign=prohi-tech : Высокоскоростной интернет http://mgts.ru/home/internet/bundle/?utm_source=youtube&utm_medium=video&utm_campaign=prohi-tech : Домашний интернет + моб. связь (вместе дешевле) Если хотите порт Adobe Premiere под Linux, голосовать тут https://adobe-video.uservoice.com/forums/911233-premiere-pro/suggestions/34146058-linux-support В прошлых видео мы уже делали обзор Linux Mint. Сегодня же хотелось бы сделать нечто большее - поиграть в Windows-игры Ведьмак 3 и Doom для Linux с использованием Steam Play для Linux (Wine / Proton / DXVK / VK3D). Посмотреть, как дела обстоят с монтажом видео в Shotcut, Davinci Resolve и Davinci Studio. Разобраться, что такое Flatpak и почему его появление - это важно. Что изменилось в линуксе за последнее время, в целом, и к чему все движется. Установка Davinci или Davinci Studio на Linux Mint, Ubuntu и другие дистрибутивы этого семейства: 1) Установить проприетарный драйвер Nvidia 2) Выполнить команду: sudo apt install libssl1.0.0 libssl-dev ocl-icd-opencl-dev libgstreamer-plugins-base1.0-0 fakeroot && sudo ln -s /usr/lib/x86_64-linux-gnu/libgstreamer-1.0.so.0 /usr/lib/libgstreamer-0.10.so.0 && sudo ln -s /usr/lib/x86_64-linux-gnu/libgstbase-1.0.so.0 /usr/lib/libgstbase-0.10.so.0 && sudo ln -s /lib/x86_64-linux-gnu/libssl.so.1.0.0 /usr/lib/libssl.so.10 && sudo ln -s /lib/x86_64-linux-gnu/libcrypto.so.1.0.0 /usr/lib/libcrypto.so.10/usr/lib/libssl.so.10 Данная команда установит недостающие библиотеки и создаст необходимые символические ссылки. 3) Скачать с сайта Davinci Resolve https://www.blackmagicdesign.com/products/davinciresolve/ установщик и установить. 4) Добавить рамки к окну Davinci можно, вот инструкция для KDE https://youtu.be/H82ZUO06EAk?t=114 Полезный софт для Linux Видеомонтаж Davinci Resolve - https://www.blackmagicdesign.com/ru/products/davinciresolve Lightworks - https://www.lwks.com Kdenlive - https://kdenlive.org Shotcut - https://shotcut.org Захват видео, работа с картами захвата, скрикаст, конвертация VLC - http://www.videolan.org (да, это видеоплеер, но лучше ничего нет) OBS - https://obsproject.com/ru (для линукса пока сыроват, но перспективен) Работа со звуком (аналог Audition и SoundForge) Oceanaudio - https://www.ocenaudio.com Написание музыки (аналоги Logic и Cubase) Ardour - https://ardour.org bitwig studio - https://bitwig.com/en/download.html lmms - https://lmms.io Работа с RAW Aftershot - http://www.aftershotpro.com/en/products/aftershot/pro/ (если не нравится бесплатные Raw Therapee и Dark Table) Как перенести ISO-образ Linux на флешку: С помощью unetbootin: http://unetbootin.sourceforge.net Скачать сам Mint 19v2: https://linuxmint.com/download.php Как сделать так, чтобы компьютер грузился по-умолчанию в Windows, а не Linux http://help.ubuntu.ru/wiki/grub_customizer Как поставить Опера Opera для Linux - http://opera.com/ru/computer/linux Список больших крутых игр для Linux https://www.gamingonlinux.com Программы в формате Flatpak https://flathub.org/home
Views: 286812 PRO Hi-Tech
Installing DaVinci Resolve 12.5 On Ubuntu 16.04
 
02:55
A quick-and-dirty guide for getting DaVinci Resolve 12.5 installed on Ubuntu 16 and up. Audio playback requires a Decklink at this time. Podcast ► https://LinuxGameCast.com/podcast Support ► https://LinuxGameCast.com/support Wishlist ► https://goo.gl/glF2hi Schedule ► https://LinuxGameCast.com/schedule Download: https://www.blackmagicdesign.com/products/davinciresolve Install dependencies: sudo apt-get install libssl-dev libgstreamer-plugins-base0.10-dev Symlink libcrypto and libssl: sudo ln -s /lib/x86_64-linux-gnu/libcrypto.so.1.0.0 /usr/lib/libcrypto.so.10 sudo ln -s /lib/x86_64-linux-gnu/libssl.so.1.0.0 /usr/lib/libssl.so.10 Install DaVinci: sudo sh DaVinci_Resolve_12.5.5_Linux.sh
Views: 20545 linuxgamecast
How to Install u torrent on Ubuntu 14.04  - 2016
 
02:55
https://youtu.be/S036TUCem-Q How to install uTorrent on ubuntu 14.04 LTS : - 1) Open the Terminal by pressing (Ctrl + Alt + T ) 2) Run the below codes in the terminal to Install libssl. sudo apt-get update Enter the password sudo apt-get install libssl1.0.0 libssl-dev 3) Now download uTorrent software Click here to download 4) Since the downloaded file is in downloads folder.Type the following in terminal cd Downloads/ 5) Use the following command to copy the file to opt directory sudo cp utserver.tar.gz /opt/ 6) Run the below command to move to the opt directory cd /opt/ Now extract the tar file by typing the below code sudo tar -xvf utserver.tar.gz 7)Now delete the extracted tar file sudo rm -rf utserver.tar.gz 8) Run the following command to extract the downloaded file to /opt directory sudo tar -zxvf utserver.tar.gz -C /opt/ 9) Now give permission to extracted directory to run uTorrent-server sudo chmod -R 777 /opt/utorrent-server-alpha-v3_3/ 10) Now link uTorrent server to the /user/bin directory sudo ln -s /opt/utorrent-server-alpha-v3_3/utserver /usr/bin/utserver 11) Start uTorrent utserver -settingspath /opt/utorrent-server-alpha-v3_3/ 12) Open Your Browser [chrome /firefox] type the below command localhost:8080/gui 13) A popup will be shown enter Username = admin Password field should be blank Please subscribe to my channel:- https://www.youtube.com/nkkmedia Facebook Page:- https://www.facebook.com/nkktech
Views: 4365 karunakar Nampally
How to install the MonetaryUnit X11 Wallet on Ubuntu VPS
 
03:04
apt-get install git apt-get install automake apt-get install build-essential libtool autotools-dev autoconf pkg-config libssl-dev libevent-dev bsdmainutils apt-get install libboost-system-dev libboost-filesystem-dev libboost-chrono-dev libboost-program-options-dev libboost-test-dev libboost-thread-dev apt-get install libssl-dev build-essential software-properties-common apt-get install libboost-all-dev libminiupnpc-dev apt-get install libdb4.8-dev libdb4.8++-dev git clone https://github.com/muecoin/MUECore.git cd MUECore ./autogen.sh ./configure make cd src ls mue* strip mued strip mue-cli strip mue-tx cp mued ~ cp mue-cli ~ cp mue-tx ~
Views: 450 MUEtorials
GameMaker Studio 2 - VirtualBox & Linux configuration
 
07:46
Setup and configure a virtual machine to run/compile GameMaker projects on Linux. Commands in description. From virtual machine creation to GameMaker Studio 2 setup. The whole process took me about 30 minutes (I considerably sped up parts of this video). NOTES: - I'm using Xubuntu because it's less resource hungry. The resulting packages will run on Ubuntu just fine. - You can download Xubuntu from here: http://cdimages.ubuntu.com/xubuntu/releases/16.04/release/xubuntu-16.04.2-desktop-amd64.iso 0:22 - Machine Configuration 0:55 - Xubuntu Installation 2:11 - First boot & system update ----------------------------------------------------------------------------- sudo apt-get update && sudo apt-get upgrade -y 3:07 - VirtualBox Guest Additions Setup (part I) ----------------------------------------------------------------------------- sudo apt-get install -y build-essential 3:54 - VirtualBox Guest Additions Setup (part II) ----------------------------------------------------------------------------- sudo ./VBoxLinuxAdditions.run 4:24 - Reboot (to initialize the Guest Additions) 4:31 - Enable Bidirectional Clipboard 4:48 - Install the GameMaker Studio 2 dependencies to build on linux ----------------------------------------------------------------------------- sudo apt-get install -y gnome-terminal openssh-client openssh-server libopenal1 libopenal1:i386 lib32z1 lib32ncurses5 libbz2-1.0:i386 libxxf86vm1 libstdc++6:i386 libssl1.0.0:i386 libglu1:i386 libxrandr-dev libxrandr2:i386 clang libc6-dev-i386 libcurl3:i386 libssl-dev:i386 5:10 - Copy IP address of Virtual Machine 5:25 - GameMaker Studio 2 Configuration 6:17 - Project Run (on Linux) I hope this is somewhat useful :) ----------------------------------------------------------------------------- Website: https://nikles.it Twitter: https://twitter.com/niklesgames Buy me a coffee: https://ko-fi.com/nikles
Views: 2641 Nikles
Bytecoin - Instalando e Minerando usando o XMRIG no Ubuntu via Terminal
 
08:08
1) sudo apt-get install git build-essential cmake libuv1-dev libmicrohttpd-dev libssl-dev 2) cd 3) sudo git clone https://github.com/xmrig/xmrig.git xmrig 4) cd xmrig 5) sudo cmake . 6) sudo make 7) sudo ./xmrig -a cryptonight -o SUA_POOL -u SUA_CARTEIRA_BYTECOIN -p x -t 1 --donate-level=1 https://github.com/xmrig/xmrig/#options Doação/Donate: BCN: 24J9LDGKBoj2YpuWVrYjW9W4VUR6G8pM4YLAHsNkLSgb8Ek6KWznwdLgUwbp2mh6tbEDxRhLi4WEpFkpuVVuvAUECW2LiKs aqui eu ensino como usar seu computador para ganhar dinheiro através da moeda criptográfica Bytecoin usando uma carteira e um programa minerador para o processo de mineração da moeda Bytecoin. Site Bytecoin Brasil: https://goo.gl/Q2rTFb (Carteiras, Pool's, Mineradores, Grupos, Ajuda, Contatos e etc)
Views: 5049 Estanislau Tube
Snort Configuration for IDS on Ubuntu 16.04 LTS - part2
 
17:12
Installing the Snort Pre-Requisites a)pcap - Packet capture b)PCRE - Perl Compatible Regular Expressions c)Libdnet - network functions D)DAQ - Data AcQuisition modules 1) sudo apt-get install -y build-essential 2) sudo apt-get install -y libpcap-dev libpcre3-dev libdumbnet-dev mkdir ~/snort_src cd ~/snort_src Installation of DAQ The Snort DAQ Data AcQuisition library has a few pre-requisites that need to be installed: 3)sudo apt-get install -y bison flex cd ~/snort_src 4)wget https://www.snort.org/downloads/snort/daq-2.0.6.tar.gz tar -xvzf daq-2.0.6.tar.gz cd daq-2.0.6 ./configure make sudo make install Installation of snort before installation of snort 4)sudo apt-get install -y zlib1g-dev liblzma-dev openssl libssl-dev now download and install snort cd ~/snort_src 5)wget https://snort.org/downloads/snort/snort-2.9.8.0.tar.gz tar -xvzf snort-2.9.8.0.tar.gz cd snort-2.9.8.0 ./configure --enable-sourcefire make sudo make install # Create the Snort directories: sudo mkdir /etc/snort sudo mkdir /etc/snort/rules sudo mkdir /etc/snort/rules/iplists sudo mkdir /etc/snort/preproc_rules sudo mkdir /usr/local/lib/snort_dynamicrules sudo mkdir /etc/snort/so_rules # Create some files that stores rules and ip lists sudo touch /etc/snort/rules/iplists/black_list.rules sudo touch /etc/snort/rules/iplists/white_list.rules sudo touch /etc/snort/rules/local.rules sudo touch /etc/snort/sid-msg.map Creating our logging directories: sudo mkdir /var/log/snort sudo mkdir /var/log/snort/archived_logs cd ~/snort_src/snort-2.9.8.0/etc/ sudo cp *.conf* /etc/snort sudo cp *.map /etc/snort sudo cp *.dtd /etc/snort cd ~/snort_src/snort-2.9.8.0/src/dynamic-preprocessors/build/usr/local/lib/snort_dynamicpreprocessor/ sudo cp * /usr/local/lib/snort_dynamicpreprocessor/ comment out : - sudo sed -i "s/include \$RULE\_PATH/#include \$RULE\_PATH/" /etc/snort/snort.conf sudo snort -T -i eth0 -c /etc/snort/snort.conf test simple rule websites : -https://www.sbarjatiya.com/notes_wiki/index.php/Snort_general_rule_options http://manual-snort-org.s3-website-us-east-1.amazonaws.com/node31.html --------------------------------------------------------------------------------------------- If you guys are using Physical machine instead of Virtual machine. Some network cards have features named Large Receive Offload (lro) and Generic Receive offload (gro). With these features enabled, the network card performs packet reassembly before they're processed by the kernel. By default, Snort will truncate packets larger than the default snaplen of 1518 bytes. In addition, LRO and GRO may cause issues with Stream5 target-based reassembly. We recommend that you turn off LRO and GRO. This feature introduced so that NIC can do reassembly on behalf of CPU. By this way CPU have to bear less load of work. This give good performance and this feature is included in many modern NIC cards. Even NIC cards also do CRC checksum error checks also. Just initiate below command to see the status of LRO and GRO. Turn them off. To disable LRO and GRO for any interface that Snort listens on. sudo apt-get install -y ethtool post-up ethtool -K eth0 gro off post-up ethtool -K eth0 lro off
Views: 10493 Ashok Dewan
How to install WhatPulse on Ubuntu 14.04.2
 
09:52
Here is a list of things I had to do including all commands: 1. Download debian version of WhatPulse for your OS (32/64bit) 2. Extract files to desktop (or where you want it installed) 3. Open http://whatpulse.org/kb/content/7/15/en/linux-installation.html which will help you a bit. 4. Open Terminal with Ctrl + Alt + T and write the following commands: sudo apt-get upgrade sudo apt-get update sudo apt-get install libqtcore4 libqtwebkit4 libqt4-sql libqt4-sql-sqlite libssl-dev libqtscript4-sql libqtscript4-core libpcap0.8 libpcap0.8-dev 5. Put .sh and whatpulse file in a location where you want it to be installed 6. Run Whatpulse and click Yes when prompted to fix some stuff 7. in terminal go to the location where your WhatPulse is located with 'cd /home/yourname/foldername' or different path depending on where you put your installation folder 8. run 'sudo setcap cap_net_raw,cap_net_admin=eip ./whatpulse' 9. run .sh script from installation folder by just dragging it in terminal and running it as root. (or type 'sudo '/home/username/foldername/setup-input-permissions.sh' ' and enter your username when prompted to enter username to add to group. 10. Restart Whatpulse 11. Open Startup Applications and add it to startup programs __________________________________________________________ This was a learning experience for me too. I primarily use Windows as my OS, but I want to learn more about linux too. The Whatpulse help page did help a lot, but I think it's slightly too hard for someone completely new to Ubuntu / Linux environment. In order for me to find all the right packages I firstly installed aptitude with command 'sudo apt-get install aptitude' which then allowed me to search for the libraries I needed to download, which was done by searching with this command 'sudo aptitude search ...' In total it took me about 35 minutes to figure out what to do, but I'm happy I did it. I'd probably be able to install it in just a few minutes if I had to do it again.
Views: 892 TechnologyToast
03 - Curso de Ruby, Instalación en Linux
 
06:44
Comandos: 1. sudo apt-get update 2. sudo apt-get install git-core curl zlib1g-dev build-essential libssl-dev libreadline-dev libyaml-dev libsqlite3-dev sqlite3 libxml2-dev libxslt1-dev libcurl4-openssl-dev python-software-properties libffi-dev 3. sudo apt-get install libgdbm-dev libncurses5-dev automake libtool bison libffi-dev 4. curl -L https://get.rvm.io | bash -s stable 5. source ~/.rvm/scripts/rvm 6. rvm install 2.3.0 7. rvm use 2.3.0 --default 8. ruby -v 9. gem install bundler
Views: 1491 Raul Palacios
Odoo 12.0: Deploy on Ubuntu Server 18.04 (WSGI & Apache)
 
01:52:56
Support me on #Patreon: https://www.patreon.com/Mo7amed_Ma9dy Basic Deployment Odoo 12.0 CE on Ubuntu Server 18.04 (WSGI & Apache) Create a server on Digital Ocean https://m.do.co/c/6a942903dcec - Install dependencies sudo apt-get install git python3-pip python3-dev libjpeg-dev libxml2-dev libssl-dev libsasl2-dev node-less libldap2-dev libxslt-dev postgresql libapache2-mod-wsgi-py3 apache2 - Add odoo as a system user: sudo adduser --system --group odoo --home /opt/odoo - Add odoo as a DB user sudo su - postgres createuser -s odoo alter role odoo with password 'secret'; - Clone Odoo 12.0 CE sudo su - odoo -s /bin/bash git clone https://www.github.com/odoo/odoo --depth=1 --branch=12.0 --single-branch - Configure WSGI file sudo su - odoo -s /bin/bash cp /opt/odoo/odoo/setup/odoo-wsgi.example.py /opt/odoo/odoo-wsgi.py vim odoo-wsgi.py a2enmod wsgi - Apache configuration file IT IS NOT ALLOWED TO ADD ANGLED BRACKETS IN THE DESCRIPTION. SO, PLEASE FIND THE CONFIGURATION IN THE VIDEOS AND TRY TO RE-TYPE IT MANUALLY
Views: 1237 Mohamed Magdy
how to install libcurl and libcurl-dev in ubuntu or linux mint or kali linux
 
01:20
how to install "libcurl and libcurl-dev" in ubuntu or linux mint or kali linux how to install "libcurl and libcurl-dev" in ubuntu or linux mint or kali linux open terminal(CTRL+ALT+T) 1. sudo apt update Package libcurl-dev is a virtual package provided by libcurl4-openssl-dev 2. sudo apt install libcurl4-openssl-dev
Views: 4600 How To Install
Install SIPp 3.3 on Ubuntu 12.04 Server
 
08:53
Demonstrate packages needed to install SIPp 3.3 on Ubuntu 12.04 (at least the packages I needed to install on my server). The same instruction should work for 13.04. wget http://sourceforge.net/projects/sipp/files/sipp/3.3/sipp-3.3.tar.gz tar -xvzf sipp-3.3.tar.gz apt-get install pcaputils apt-get install libncursesw5-dev apt-get install libncurses5-dev apt-get install libpcap-dev apt-get install openssl apt-get install libssl-dev apt-get install libssl1.0.0 apt-get install libssl0.9.8 make pcapplay_ossl --- if you do not have make installed ---- apt-get install build-essential apt-get install make -----------------------------------
Views: 10770 Kurt Pasewaldt
Instalar rails en raspberry pi 3
 
17:33
sudo apt-get install -y git curl zlib1g-dev subversion sudo apt-get update sudo apt-get install -y openssl libreadline6-dev git-core zlib1g libssl-dev sudo apt-get install -y libyaml-dev libsqlite3-dev sqlite3 sudo apt-get install -y libxml2-dev libxslt-dev sudo apt-get install -y autoconf automake libtool bison curl -L get.rvm.io | bash -s stable --rails source ~/.rvm/scripts/rvm
Views: 153 Jesus Martinez
Compilando e instalando Kernel Linux
 
17:07
Usuario: sistemas contraseña: 1234 contraseña root: 1234 Distribucion: Debian 9.5 Version de kernel isntalada: 4.9.0 Espacio en disco: 21GB Maquina virtual: Virtual Box 1- Primer paso, preparamos el entorno Paquetes necesarios # apt-get update #apt-get install build-essential libncurses5-dev gcc libssl-dev bc 2- Descargamos el Kernel, en este caso la version 4.14 # cd /usr/src # wget https://cdn.kernel.org/pub/linux/kernel/v4.x/linux-4.14.8.tar.xz 3- Descomprimimos tar xf linux-4.14.8.tar.xz 4- Configuracion En este paso podemos generar un archivo de configuraciòn ".config", el achivo base que va a contener las directrices que tendra que seguir el compilador para generar el kernel. Tenemos varios mètodos, por un lado usando la herramienta "menuconfig" que mediante un programa interactivo podemos generar nuestro archivo ".config", por el otro podemos usar el archivo ".config" de nuestro kernel actual y en uso, de esta forma nos aseguramos que el kernel que estamos compilando y va a reemplazar al que tenemos en uso va a estar contruido para nuestro sistema. A modo demostrativo mostramos el mètodo interactivo y luego el otro. Ademas, tomamos nota del kernel actualmente instalado y en uso. # uname -r el kernel es el 4.9.0-6-686 Primero generamos el ".config" con menuconfig # cd /usr/src/linux-4.14.8 # menuconfig Esta es la herramienta interactiva para generar dicho archivo, desde aqui podemos preparar nuestro kernel, una vez configurado guardamos y salimos. Esto nos crea el archivo ".config", cada configuración debe hacerse a conciencia de lo que se busca con el kernel que estamos generando. Como el proposito de este tutorial es generar un kernel e instalarlo en nuestro sistema vamos a tomar las configuraciones del kernel que tenemos instalado y actualmente en uso anulando lo que hemos hecho en el paso anterior, asi nos aseguramos que despues de la instalación nuetro sistema va a funcionar correctamente. # yes "" | make oldconfig Notese que el comando responde de forma automatica todas las preguntas con la opcion marcada por defecto (y/n), esto por que al importar las configuraciones de nuestro kernel actual y al compararlas con el kernel nuevo existen opciones extras o nuevas, por eso dejamos que conteste de forma automatica. En este punto ya tenemos un archivo ".config" generado a partir de las configuracines actuales de nuestro sistema, es decir, que el kernel que vamos a compilar esta hecho para el sistema en el que se compila. 5- Compilando # make Cuando ejecutamos ese comando (siempre dentro del directorio en el que estamos compilando) se pasa a crear el kernel, a compilarlo. Este paso puede demorar bastante tiempo, incluso mas de una hora, dependiendo de nuestra capacidad de procesamiento. 6- Modulos Ahora nos queda compilar e instalar los modulos # make modules una vez terminada la compilacion de modulos los instalamos # make modules_install 7- Instalacion del kernel En el directorio "/boot/" encontramos los archivos que corresponden al kernel, el programa GRUB basicamente lo que hace al momento de elegir el SO cuando encendemos la computadora es buscar el kernel, cargarlo en memoria y asi poder cargar el sistema operativo. La instalacion supone reemplazar los archivos correspondientes en el directorio "/boot/" y modificar el menu de GRUB para que apunte al nuevo kernel, recordemos que en este caso el GRUB apunta al kernel "4.9.0" y el nuevo es el "4.14.8" # make install 8- Reiniciamos y esperamos que todo haya salido bien :) # reboot
Views: 598 Sergio Luis Pernas
installer asterisk 13 ( debian 8 )
 
41:01
mettre à jour apt-get update apt-get upgrade et installer les dépendances nécéssaires à la compilation d’Asterisk. apt-get install build-essential libxml2-dev libncurses5-dev linux-headers-`uname -r` libsqlite3-dev libssl-dev ------------------------------------------------------------------------------------- si debian vous demande un dvd a insérer vous devez aller dans "/etc/apt/sources.list" et mettre la ligne deb cdrom:[Debian GNU/Linux 8.2.0 ........... en commentaire ----------------------------------------------------------------------------------- créer un dossier mkdir /usr/src/asterisk cd /usr/src/asterisk installation On télécharge d’Asterisk wget http://downloads.asterisk.org/pub/telephony/asterisk/asterisk-13-current.tar.gz on l’ installe tar xvzf asterisk-13-current.tar.gz aller dans le dossier cd asterisk-13-current.tar.gz configurer ./configure ------------------------------------------- error apt-get install UUID contrib/scripts/install_prereq install ./configure ------------------------------------------- make menuselect installer les sons français Dans "Core Sound Package cocher" la case CORE-SOUNDS-FR-ULAW Dans "Music On Hold File Packages" cochez MOH-OPSOUND-ULAW (Dechochez celui en WAV), Dans "Extras Sound Package" cochez EXTRA-SOUNDS-FR-ULAW. Echap et appuyez et sauvegarder les changements. terminer l’installation make make install make samples make config lancer Asterisk /etc/init.d/asterisk start Vérifier votre serveur Asterisk asterisk -cvvvvvvvvvvr Configuration Editer gedit /etc/asterisk/sip.conf ;language=en (ligne 340) remplacez la par language=fr et enlever le ; Configuration Editer gedit /etc/asterisk/users.conf ------------------------------------------------------- [general] hasvoicemail = yes hassip = yes hasiax = yes callwaiting = yes threewaycalling = yes callwaitingcallerid = yes transfer = yes canpark = yes cancallforward = yes callreturn = yes callgroup = 1 pickupgroup = 1 nat = yes [6007] type=friend host=dynamic dtmfmode=rfc2833 disallow=all allow=ulaw fullname = alex username = alex secret=iprec context = work [6006] type=friend host=dynamic dtmfmode=rfc2833 disallow=all allow=ulaw fullname = franck username = franck secret=iprec context = work [6008] type=friend host=dynamic dtmfmode=rfc2833 disallow=all allow=ulaw fullname = faiza username = faiza secret=iprec context = work ------------------------------------------------------------ Configuration Editer gedit /etc/asterisk/extensions.conf ------------------------------------------------------------ [general] static=yes writeprotect=no clearglobalvars=no [globals] CONSOLE=Console/dsp IAXINFO=guest TRUNK=DAHDI/G2 TRUNKMSD=1 attention les symboles supérieur ne sont pas autorisé sur youtube superieur a été remplacé par ? [work] exten =? _6XXX,1,Dial(SIP/${EXTEN},20) exten =? _6XXX,2,Hangup() ---------------------------------------------------------------
Views: 22949 titi les bons tutos
How to Install and Compile Asterisk on Ubuntu Rackspace Cloud
 
10:48
Learn how to compile, install and configure Asterisk on Ubuntu using a cloud server from Rackspace. https://www.udemy.com/how-to-install-asterisk-on-centos-linux-video/?couponCode=YTUBEJAN16 In this video we will follow steps to compile and install Asterisk on a fresh install of Ubuntu. Below are the commands used in the video and a link to my blog. If you want to get more information about Asterisk and Linux be sure to check out my Udemy courses. https://www.udemy.com/u/jonmanning3/ passwd apt-get update apt-get upgrade -y && reboot apt-get install linux-headers-$(uname -r) apt-get install build-essential wget libssl-dev libncurses5-dev libnewt-dev libxml2-dev linux-headers-$(uname -r) libsqlite3-dev uuid-dev cd /usr/src/ wget http://downloads.asterisk.org/pub/telephony/dahdi-linux-complete/dahdi-linux-complete-current.tar.gz wget http://downloads.asterisk.org/pub/telephony/libpri/libpri-1.4-current.tar.gz wget http://downloads.asterisk.org/pub/telephony/asterisk/asterisk-11-current.tar.gz tar zxvf dahdi-linux-complete* tar zxvf libpri* tar zxvf asterisk* cd /usr/src/dahdi-linux-complete* make && make install && make config cd /usr/src/libpri* make && make install cd /usr/src/asterisk* ./configure && make menuselect && make && make install && make config && make samples /etc/init.d/dahdi start /etc/init.d/asterisk start asterisk -rvvv http://jonathanmanning.com/2016/01/31/how-to-compile-and-install-asterisk-on-rackspace-cloud-ubuntu-server/
Views: 683 Jon Manning
►Install utorrent For Ubuntu In 2016 - The Easiest Way
 
03:15
►Install utorrent For Ubuntu In 2016 - The Easiest Way ================================================= utorrent is the most popular torrent client.It can support almost all major operating system as like Windows,Mac OS X,Ubuntu,Debian,Android etc. Installing utorrent for Ubuntu is very important for beginner ubuntu users.There are several installation method available on the internet.But, those are hard for beginner.Because those are command line based. In this video I have showed you how to install utorrent on Ubuntu easily.The video transcript are given below: 1.Open Terminal Or Presss CTRL + T 2. "sudo apt-get update" and press Enter 3. Enter Your Admin Password 4. Wait Sometime For Updating 5. "sudo apt-get install libssl1.0.0 libssl-dev" And Press Enter 6. Press "Y" And Continue 7. Close Terminal 8. Download utorrent (http://www.utorrent.com/intl/en/downloads/linux) 9. Extract And Set Permission 10. Open Browser Ano Go To http://localhost:8080/gui Enjoy!!! If you have more question about this guide, Please visit: http://howtouselinux.net/ubuntu-torrent-client/
Views: 17692 Linux For All
Go through to  u torrent in Ubuntu,16.04,15.04,14.04,12.04,17.10 Linux
 
05:38
How to install utorrent in Ubuntu 17.04,16.04,14.014,12.04. This videos will be showing you how to install uTorrent in Ubuntu 16.04 LTS and Ubuntu 17.04. #utorrent uTorrent is worlds most popular BitTorrent client. It is now available to Ubuntu as uTorrent Server. It comes with a Web UI that is almost identical to it’s Desktop UI Command used :- Download it From www.utorrent.com open terminal Commands: sudo apt-get update sudo apt-get install libssl1.0.0 libssl-dev sudo tar -zxvf utserver.tar.gz -C /opt/ sudo chmod 777 /opt/utorrent-server-alpha-v3_3/ sudo ln -s /opt/utorrent-server-alpha-v3_3/utserver /usr/bin/utserver utserver -settingspath /opt/utorrent-server-alpha-v3_3/ & In browser: http://localhost:8080/gui username admin password Blank Thanks for watching please subscribe my channel. How To Repair Ubuntu || Recover Ubuntu || Restore Ubuntu. https://www.youtube.com/watch?v=ZxE_cMs6cjA How To Install iTunes On Ubuntu || iTunes On Linux || How to install Playonlinux https://www.youtube.com/watch?v=TbgSlypw_yY How To Install iTunes On Ubuntu || iTunes On Linux || How to install Playonlinux https://youtu.be/TbgSlypw_yY How To Install KODI 17 On Ubuntu 17.04,16.04 Linux || Installation of free cable TV Kodi17 on Ubuntu https://youtu.be/50ptmpfhpe4 ANYDESK-How to Install anydesk on Ubuntu Linux || remote access software || Anydesk on linux,Mint https://youtu.be/8GLAJpbLa8M Best way to get install Microsoft Office 2007,2010,2013,2016,on Ubuntu Linux. https://youtu.be/KdsTVpRp2yM How to install iTunes on ubuntu 17.04,16.04,14.04,12.04,10.04 linux,suse,mint,debian. https://youtu.be/nt_Duhm1ZHU How to instal skype In Ubuntu 16.04,17.04 Linux. https://youtu.be/qEXGwuPRvWQ. How to resolve/fix initramfs error BusyBox issue in Ubuntu. https://youtu.be/4vGK6M-X6eo
Views: 7120 SJ Technics
How to mine Uplexa (UPX) on Raspberry Pi & CPU (XMRIG Tutorial with compiling) UPX-two
 
05:29
New video every Tuesday! Today we are taking a look on how to mine Uplexa (UPX). First on Raspberry Pi, then on your ordinary Windows CPU. You can find all of the commands and links below as well to follow via copy and paste. Discord Server: https://discord.gg/Qb8K3v7 LINUX Updating most distros: sudo apt-get update CMD for installing essentials: sudo apt install git build-essential cmake libuv1-dev libmicrohttpd-dev nano wget clang libclang-dev curl htop Updating those essentials: sudo apt update -y && apt upgrade -y Getting the mining software: git clone https://github.com/uPlexa/xmrig-upx.git Building / Compiling: cd xmrig-upx mkdir build cd build cmake .. make OPTIONAL: if OpenSSL is missing try sudo apt-get upgrade sudo apt-get install libssl-dev Starting the miner: cd xmrig-upx cd build ./xmrig Config.json example: { "algo": "cryptonight-upx/2", "api": { "port": 0, "access-token": null, "id": null, "worker-id": null, "ipv6": false, "restricted": true }, "autosave": true, "av": 0, "background": false, "colors": true, "cpu-affinity": null, "cpu-priority": null, "donate-level": 1, "huge-pages": true, "hw-aes": null, "log-file": null, "max-cpu-usage": 80, "pools": [ { "url": "uplexa.herominers.com:10471", "user": "UPX1STPvVC7KJkoSKoqRUrVPdzV7QvRFhgVERzvpnwCmjaXYSBR5jtgJXbSKGyseBKZjvH5RX3qQiJ9J7YNC7BRz14qRCWu4rw", "pass": "x", "rig-id": "RPI3", "nicehash": false, "keepalive": false, "variant": "trtl", "enabled": true, "tls": false, "tls-fingerprint": null } ], "print-time": 60, "retries": 5, "retry-pause": 5, "safe": false, "threads": [ { "low_power_mode": false, "affine_to_cpu": 1 }, { "low_power_mode": false, "affine_to_cpu": 2 }, ], "user-agent": null, "syslog": false, "watch": false } WINDOWS Software Link: https://github.com/uPlexa/xmrig-upx Example start.cmd line: xmrig.exe --donate-level 1 -t4 -o uplexa.herominers.com:10471 -u UPX1STPvVC7KJkoSKoqRUrVPdzV7QvRFhgVERzvpnwCmjaXYSBR5jtgJXbSKGyseBKZjvH5RX3qQiJ9J7YNC7BRz14qRCWu4rw -p name -a cryptonight-upx/2 -k (-t is the number of threads, -o your pool info, -u your wallet -p and -a cryptonight-upx/2 for the new UPX algo) PHONE MINING Video by imineblocks: https://www.youtube.com/watch?v=iCwu0FqcO_M Article on the new android software https://medium.com/@uplexa/how-to-mine-uplexa-on-android-devices-96e5bb24c491 Amazon links now for US / CAN / UK / DE / FR / SP / IT Raspberry Pi 3: https://geni.us/raspberryp Ryzen AM4 Motherboards: https://geni.us/am4mob Ryzen CPUs: https://geni.us/ryzenCPU LGA1151 CPUs: https://geni.us/LGA1151 Noctua CPU Coolers: https://geni.us/NoctuaCooler Explore and support us: 🌎 HiveOS (free for 3 Rigs): https://hiveos.farm?ref=54555 🌎 Ledger Hardware Wallet: https://www.ledgerwallet.com/r/b0aa 💳 Revolut crypto-friendly bank account: https://revolut.com/r/franzf9gv 💳 Wirex Visa BTC debit card: https://wirexapp.com/r/CursedMining Exchanges used by this channel: 📈 Binance: https://www.binance.com/?ref=10168608 📈 KuCoin: https://www.kucoin.com/#/?r=E3m4MO ► Cryptopia: https://www.cryptopia.co.nz/Register?referrer=FeanorOmega OnePlus Invite Link (20$ voucher for accessoires) https://www.oneplus.com/at/invite#IF1P9VU029ZRS3J ► Tip Jar: BTC: 1N2sND6H8ToSExBYciTizNK5NoS98vcXob LTC: LfGP8yCymqzW84pJSoWNw22bDzximhHXw5 ZenCash: znYtrGa55jeGFhQxhdDsjKDLQameiejUd4Q DeepOnion: DmyQAT7qoPvMBJVZ5JougidkR2pjP6UJ8q NXS: 2SUcYG8hVeVeTv8ckWeaE2Prmp4vnbcBHzWiP9UeAxHJWSr5AEs aeon: WmsNHwNSZu2U1io5p9PWvVN45zPTozjqdS9FTDtt6ccsZ8uVHzGxd7fM3qHCMhLKmeTr47ScikQVdEt63VVzpS8D1DYsihq85 Plenteum: PLeaiXfwXHB2x7vyxbMnueirxBze1aXEB7ZGns4fBCYLHYsNdK3CFkUUAn7KYfLLve3siXYYFWEwmEu3APEMqRgV8iosKKTsEL Please note that this is a tech and mining channel - this means that if projects are mentioned in videos, this is done because of their technical side or because I am sharing experiences. This is in not in any way financial advice (or a buy tip) etc #raspberrypimining #cpumining #uplexa
Views: 1455 Cursed Mining
Tutorial: Tvheadend compiling and installation w/ VNC
 
14:48
Video tutorial showing how to compile and install Tvheadend on Lubuntu to use with eg. XBMC or TVHGuide (Android). Same tutorial works on all Ubuntu variants. After the Tvheadend installation I also show how to install and setup x11vnc to control your machine remotely. This is useful if you setup an old laptop as a DVR and then want to eg. update Tvheadend without having to actually physically access the laptop. There's a bandwidth issue with using Tvheadend from virtualbox, but it kinda works from there too. Commands used: sudo apt-get update && sudo apt-get dist-upgrade sudo apt-get install build-essential git libssl-dev libavahi-client-dev libavcodec-dev libavutil-dev libavformat-dev libswscale-dev liburiparser-dev libhdhomerun-dev ccache git clone https://github.com/tvheadend/tvheadend.git cd tvheadend/ ./configure make sudo make install tvheadend -C firefox http://127.0.0.1:9981 sudo apt-get install x11vnc openssh-server sudo x11vnc -storepasswd password /etc/x11vnc.pass sudo leafpad /etc/init/x11vnc.conf -- start on login-session-start script x11vnc -noxrecord -noxfixes -noxdamage -nomodtweak -display :0 -auth /var/run/lightdm/root/:0 -forever -bg -o /var/log/x11vnc.log -rfbauth /etc/x11vnc.pass -rfbport 5900 end script -- NOTE: I recommend you use a password other than "password" :)
Views: 5109 krypton
How to Install Nagios Monitoring 4.3.4 & Nagios Plugins 2.2.1 in Ubuntu 17.10 and Debian 8.3
 
16:56
I am Using Ubuntu 17.10 but you can install it in ubuntu From 17.04 to 14.04 1. Installing LAMP Step1 :- sudo apt update && sudo apt upgrade Step2 :- sudo apt install apache2 libapache2-mod-php7.0 php7.0 Step3 :- sudo apt install wget unzip zip autoconf gcc libc6 make apache2-utils libgd-dev 2. Installing NAGIOS 4.3.4 CORE Step4 :- useradd nagios Step5 :- usermod -a -G nagios www-data Step6 :- sudo wget https://assets.nagios.com/downloads/nagioscore/releases/nagios-4.3.4.tar.gz Check Website :- https://www.nagios.org/downloads/ Step7 :- sudo tar xzf nagios-4.3.4.tar.gz Step8 :- sudo cd nagios-4.3.4/ Step9 :- sudo ls Step10 :- sudo ./configure --with-httpd-conf=/etc/apache2/sites-enabled Step11 :- sudo make all Step12 :- sudo make install Step13 :- sudo make install-init Step14 :- sudo make install-commandmode Step15 :- sudo systemctl enable nagios.service Step16 :- sudo make install-config Step17 :- sudo make install-webconf Step18 :- sudo htpasswd -c /usr/local/nagios/etc/htpasswd.users nagiosadmin Step19 :- sudo a2enmod cgi Step20 :- sudo systemctl restart apache2 Step21 :- sudo systemctl start nagios Step22 :- sudo systemctl enable nagios 3. Installing NAGIOS 4.3.4 CORE Step23 :- sudo apt install libmcrypt-dev make libssl-dev bc gawk dc build-essential snmp libnet-snmp-perl gettext libldap2-dev smbclient fping libmysqlclient-dev qmail-tools libpqxx3-dev libdbi-dev Step24 :- sudo wget https://github.com/nagios-plugins/nagios-plugins/archive/release-2.2.1.tar.gz Check Website :- https://www.nagios.org/downloads/ Step25 :- sudo tar xfz release-2.2.1.tar.gz Step26 :- sudo cd nagios-plugins-release-2.2.1/ Step27 :- sudo ./tools/setup Step28 :- sudo ./configure Step29 :- sudo make Step30 :- sudo make install Step31 :- sudo ls /usr/local/nagios/libexec/ Step32 :- sudo systemctl restart nagios.service Log into Nagios Check Services Step34 :- sudo a2enmod ssl Step35 :- sudo a2ensite default-ssl.conf Step36 :- sudo systemctl restart apache2 Open the Configuration File Step37 :- sudo nano /etc/apache2/sites-enabled/000-default.conf RewriteEngine on RewriteCond %{HTTPS} off RewriteRule ^(.*) https://%{HTTP_HOST}/$1 Step38 :- sudo systemctl restart apache2.service http://DOMAIN or IP ADDRESS/nagios If you have any problem you can command below to my video or email me on [email protected] with screenshot please "SUBSCRIBE!" to cloud network channelSTART SERIES FROM THE BEGINNING: https://goo.gl/kXkmdp WATCH THE NEXT VIDEO: GO TO THE HINDI YOUTUBE CHANNEL: https://goo.gl/gTHiw2 SUBSCRIBE: https://goo.gl/LjKGzc I am Willing Make a Website, if YOU WANT ME TO MAKE A VIDEOS ON Different Technologies/field I WILL DO IT.. Watch Others Videos and Have any Queries Email to me on ([email protected]) ####--------------------------­------------------------------­------------------------------­#### Subscribe to Cloud Network :- http://goo.gl/LjKGzc Website :- http://www.cloudnetwork.in Like us on Facebook :- http://facebook.com/itcloudnetwork Follow us on Twitter :- http://twitter.com/itcloudnet Circle us on Google+ :- https://goo.gl/StVdHb Add us on LinkedIn :- http://in.linkedin.com/pub/itcloudnet Skype Id :- cloud.network1 E-Mail Id :- [email protected] ####--------------------------­------------------------------­------------------------------­--#### Thanking You Hope U Like it........
Views: 2723 Cloud Network
compilando serv do Tibia 8.60 com distro 1.0 no Ubuntu 8
 
02:19
###Como compilando serv do Tibia 8.60 com distro 1.0 no Ubuntu 8### Playlist Criando serv de Tibia em servidor VPS linux: https://www.youtube.com/playlist?list=PLCkqJ_V9N3XJ_5TC1mJw6q5MR3M6Hc3p3 1 - compactar os arquivos do serv. 2 - enviar os arquivo compactado para a pasta /home do servidor. 3 - comandos de instalação: $apt-get update $apt-get upgrade $apt-get install zip $cd /home $unzip serv.zip $apt-get install libboost-all-dev $apt-get install subversion autoconf build-essential pkg-config libboost-dev libgmp3-dev libxml2-dev liblua5.1-0-dev libmysqlclient-dev libcrypto++-dev ccache libboost-filesystem-dev libboost-regex-dev libboost-system-dev libboost-thread-dev screen libssl-dev $apt-get install libcurl4-openssl-dev $apt-get install libtcmalloc-minimal4 $cd /home/serv/source $make clean $make 3- enviar o arquivo otx, resultante da compilação (que está na pasta /home/source), para a pasta home/serv.
Views: 975 Ulbra
Install OpenSSL from Sources in Linux (RHEL / CentOS)
 
03:01
Step 1: Install Development Tools ------------------- On CentOS, RHEL & Fedora ------------------- # yum group install 'Development Tools' && yum install perl-core libtemplate-perl zlib-devel Step 2: Compile OpenSSL from Sources $ wget -c https://www.openssl.org/source/openssl-1.0.2p.tar.gz $ tar -xzvf openssl-1.0.2p.tar.gz $ cd openssl-1.0.2p/ $ ./config $ make $ make test $ sudo make install $ cd /usr/local/ssl/ $ ls -l drwxr-xr-x. 2 root root 4096 Aug 22 06:37 bin drwxr-xr-x. 2 root root 4096 Aug 22 06:37 certs drwxr-xr-x. 3 root root 4096 Aug 22 06:37 include drwxr-xr-x. 4 root root 4096 Aug 22 06:37 lib drwxr-xr-x. 6 root root 4096 Aug 22 06:36 man drwxr-xr-x. 2 root root 4096 Aug 22 06:37 misc -rw-r--r--. 1 root root 10835 Aug 22 06:37 openssl.cnf drwxr-xr-x. 2 root root 4096 Aug 22 06:37 private $ /usr/local/ssl/bin/openssl version OpenSSL 1.0.2p 14 Aug 2018 $ vim ~/.bashrc export PATH="/usr/local/ssl/bin:${PATH}" $ source .bashrc $ openssl version OpenSSL 1.0.2p 14 Aug 2018
Views: 1967 ARUN GK
HostingCoin Masternode Setup
 
10:11
sudo apt-get update sudo apt-get install git automake build-essential libtool autotools-dev autoconf pkg-config libssl-dev libboost-all-dev software-properties-common sudo add-apt-repository ppa:bitcoin/bitcoin sudo apt-get update sudo apt-get install libdb4.8-dev libdb4.8++-dev libminiupnpc-dev wget https://github.com/Hosting-Coin/HostingCoin/releases/download/HostingCoin-v2.0/hostingcoin-2.0-linux-x64.tar tar -xvf hostingcoin-2.0-linux-x64.tar cd hostingcoin-2.0-linux-x64 chmod -f 777 hostingcoind chmod -f 777 hostingcoin-cli chmod -f 777 hostingcoin-tx ./hostingcoind -daemon ./hostingcoin-cli stop apt-get install nano nano /root/.hostingcoin/hostingcoin.conf rpcuser={CHOOSE A RANDOM USER} rpcpassword={CHOOSE A RANDOM PASSWORD} rpcallowip=127.0.0.1 port=25600 rpcport=25700 listen=1 server=1 daemon=1 maxconnections=256 masternode=1 externalip={YOUR SERVER IP} masternodeprivkey={YOURMASTERNODEPRIVKEY - WE WILL GET THAT LATER} logtimestamps=1 masternodeaddr={YOUR SERVER IP}
Views: 4 Hosting Coin
Настрока 3proxy на базе Ubuntu server v14.04.1
 
15:14
Полный список введенных команд Входим под рутом: sudo -i Cначала поставим информационный набор пакетов необходимых для сборки: apt-get install build-essential libevent-dev libssl-dev Скачиваем стабильную версию: cd /etc wget http://3proxy.ru/0.7.1.1/3proxy-0.7.1.1.tgz Распаковываем: tar zxvf 3proxy-0.7.1.1.tgz Удаляем архив, он нам больше ненужен: rm 3proxy-0.7.1.1.tgz Переходим в папку с исходниками: cd 3proxy Перед компиляцией добавим одну строчку, чтобы сервер был анонимным: nano src/proxy.h Добавить строку: #define ANONYMOUS 1 Собираем: make -f Makefile.Linux Устанавливаем: make -f Makefile.Linux install Создаем папку с логами: mkdir log Переименовываем файл 3proxy.cfg.sample и counters.sample cd cfg mv 3proxy.cfg.sample 3proxy.cfg mv counters.sample counters Изменяем права на файл 3proxy.cfg chmod 0777 3proxy.cfg cd ../ Редактируем файл конфигурации(подробно про конфигурирование можно почитать на сайте http://3proxy.ru/howtor.asp ): nano cfg/3proxy.cfg Редактируем скрипт запуска: nano scripts/rc.d/proxy.sh Запускаем 3proxy: sh scripts/rc.d/proxy.sh start Добавляем в автозагрузку: nano /etc/rc.local Добаляем строку: sh /etc/3proxy/scripts/rc.d/proxy.sh start Пример файла конфигурации #!/usr/local/bin/3proxy daemon pidfile /etc/3proxy/3proxy.pid nserver 77.88.8.7 nserver 77.88.8.3 nscache 65536 timeouts 1 5 30 60 180 1800 15 60 log /etc/3proxy/log/3proxy.log D logformat "- +_L%t.%. %N.%p %E %U %C:%c %R:%r %0 %I %h %T" archiver rar rar a -df -inul %A %F rotate 30 internal 0.0.0.0 external 0.0.0.0 auth none #auth iponly #allow * 192.168.0.0/16 #deny * 0.0.0.0/0 proxy -p3128 ftppr -p3129 socks -p3130 #pop3p #admin -p80
aircrack ng on ubuntu
 
05:00
This video will show you how to install aircrack-ng on ubuntu. Aircrack-ng is not installed in ubuntu by default. You can follow the command in the video to install it. After installing it is fully functional as in the case of kali linux 2.0. The commands are: 1. "sudo apt-get install build-essential" 2. "sudo apt-get install libssl-dev" 3. "wget http://download.aircrack-ng.org/aircrack-ng-1.1.tar.gz" 4. "tar -zxvf aircrack-ng-1.1.tar.gz" 5. "cd aircrack-ng-1.1" 6. "sudo nano common.mak" (edit text as shown below,ctrl+x and say yes) locate the unused variable and change the line below..... CFLAGS ?= -g -W -Wall -Werror -O3 to CFLAGS ?= -g -W -Wall -O3 when done use ctrl+x to exit and safe when asked for.press enter. ___________________________________________________________ 7. "sudo make" Install the program. 8. "sudo make install" To learn more about aircrack-ng https://www.aircrack-ng.org/
Views: 19546 Madhav Tummala
How to - Wallet + PoS wallet on VPS for Trezarcoin with Ubuntu
 
06:10
First video, I hope you'll enjoy! For those who're lazy here is the list of all the command lines needed to make it work both for your local computer and VPS. For the Local computer: sudo apt-get update sudo apt-get upgrade sudo apt-get install qt4-qmake libqt4-dev build-essential libboost-dev libboost-system-dev libboost-filesystem-dev libboost-program-options-dev libboost-thread-dev libssl-dev libdb++-dev libminiupnpc-dev sudo apt-get install git git clone https://github.com/TrezarCoin/TrezarCoin.git cd TrezarCoin qmake «USE_UPNP=1» make cd mkdir .trezarcoin cd .trezarcoin nano trezarcoin.conf Then edit: irc=1 dns=1 qtstyle=1 daemon=1 server=1 stakegen=1 logtimestamps=1 minersleep=2000 stakemindepth=1000 stakemintime=72 stakecombine=40 stakesplit=80 port=17298 rpcport=17299 rpcuser=YOUR_USERNAME rpcpassword=YOUR_STRONG_PASSWORD addnode=162.217.249.198:17298 addnode=46.4.0.101:17298 addnode=113.176.188.121:57514 For the VPS: sudo apt-get update sudo apt-get upgrade sudo apt-get install qt4-qmake libqt4-dev build-essential libboost-dev libboost-system-dev libboost-filesystem-dev libboost-program-options-dev libboost-thread-dev libssl-dev libdb++-dev libminiupnpc-dev sudo apt-get install git git clone https://github.com/TrezarCoin/TrezarCoin.git cd TrezarCoin/src make -f makefile.unix mv trezarcoind ~/ cd rm -rf TrezarCoin mkdir .trezarcoin cd .trezarcoin nano trezarcoin.conf Then edit: irc=1 dns=1 qtstyle=1 daemon=1 server=1 stakegen=1 logtimestamps=1 minersleep=2000 stakemindepth=1000 stakemintime=72 stakecombine=40 stakesplit=80 port=17298 rpcport=17299 rpcuser=YOUR_USERNAME rpcpassword=YOUR_STRONG_PASSWORD addnode=162.217.249.198:17298 addnode=46.4.0.101:17298 addnode=113.176.188.121:57514 ./treazarcoind for starting the daemon. To get your default unlabelled wallet address just execute ./trezarcoind getaccountaddress "" To get a labelled wallet address just execute ./trezarcoind getaccountaddress "label" To see the list of adresses and their balances just execute ./trezarcoind listaccounts To stop the wallet just execute ./trezarcoind stop That's it! If you liked this, share, comments, like :) And if you really liked this, feel free to send some donation here, it'll help to make more and more contents: TZC: Tetj6ndXVqUC8ADvfeH3oUrUMvzQobuRwn BTC: 3EcH4y3oiMdnEh8VC2ARS6S5WpKLBqer6F DMD: dbUkiNAnv9h565y5ky5wdjbYcLg4AXdGNk See you soon for the next one!
Views: 6310 How To Crypto
Setting up more Masternodes.#TechTalk #Chaincoin #Masternodes
 
01:20:05
#Chaincoin revolution. I will do some live Chaincoin Masternode setup support. Thanks for watchin! CHC Stream Donations Here, Thanks! Cd7dPp1vC9L5fWtC1WtGpmXbjSpwgAyaq7 twitch.tv/chaoabunga twitter.com/cryptochao youtube.com/chaoabunga Please use my referrals https://restream.io/?ref=MQlQG https://www.coinbase.com/join/5301c2ad74a395a7370000ec https://www.coinigy.com/?r=d58c4f42 http://www.vultr.com/?ref=7138564 https://freebitco.in/?r=259805 Run these commands for a smooth installation on Ubuntu ---------------------------------------------------------------------------------------------- sudo apt-get update sudo apt-get upgrade sudo apt-get install software-properties-common python-software-properties sudo add-apt-repository ppa:git-core/ppa sudo apt-get update sudo apt-get install git sudo apt-get install -y pkg-config sudo apt-get install build-essential sudo apt-get install libtool autotools-dev autoconf automake sudo apt-get install libssl-dev sudo add-apt-repository ppa:bitcoin/bitcoin sudo apt-get update sudo apt-get install libboost-all-dev sudo apt-get install libdb4.8-dev sudo apt-get install libdb4.8++-dev sudo dd if=/dev/zero of=/swapfile bs=64M count=16 sudo mkswap /swapfile sudo swapon /swapfile git clone https://github.com/chaincoin/chaincoin cd chaincoin ./autogen.sh ./configure make cd src cp chaincoind /usr/bin/ cp chaincoin-cli /usr/bin/ chaincoind cd .chaincoin ----------------------------------------------------- chaincoin.conf (Controller Wallet) ----------------------------------------------------- rpcuser=xxxx rpcpassword=xxx rpcallowip=127.0.0.1 listen=0 server=1 daemon=1 logtimestamps=1 maxconnections=256 mnconflock=0 ----------------------------------------------------------------------- chaincoin.conf (Remote Masternode Wallet) ----------------------------------------------------------------------- rpcuser=xxxx rpcpassword=xxx rpcallowip=127.0.0.1 listen=0 server=1 daemon=1 logtimestamps=1 rpcport=11995 maxconnections=256 masternodeprivkey=xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx masternodeaddr=xxx.xxx.xxx.xxx:11994 --------------------------------------------------------- masternode.conf (Controller wallet) --------------------------------------------------------- MN1 xxx.xxx.xxx.xxx:11994 xxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxx x MN2 xxx.xxx.xxx.xxx:11994 xxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxx x ____________________________________________________________ In your wallet console type: masternode list-conf masternode start-many —————————— ARCTIC COIN —————————— Add this during compile sudo apt-get install libevent-dev Multistreaming with https://restream.io/
Views: 1008 Chao Gaming